Tiles in the hallway and in the kitchen – ceramic floor tiles for the hallway, which is better to choose for design, tiles and laminate, options in the interior of 2020

Tiles in the hallway and in the kitchen - ceramic floor tiles for the hallway

Tile on the floor for the corridor and kitchen: selection, layout, care


The most vulnerable place in the apartment is the floor. Especially hard to cover in the kitchen or hallway. Constant contact with shoes, heels, dirt from the street, temperature changes, falling objects and other loads. Therefore, the choice should be approached thoroughly taking into account all external influences on the one hand, and aesthetics on the other. After all, the hallway is the face of the apartment. The best option is to cover the floor tiles for the corridor and kitchen. Photos, recommendations for selection and styling are presented in our article.

Key performance indicators for floor tiles

For the manufacture of tiles using a mixture of fine-grained white or red clay, sand and natural components. Durability of the finished product is given due to firing in special furnaces at temperatures above + 1000 ° C.

White clay tiles are softer than red ones. You can determine the initial composition by the shade of the end face. If red clay was used, the end face is yellow or red. White clay tiles do not stain.

When choosing ceramic tiles for a corridor or kitchen, one must take into account not only aesthetic perception, but also the physical characteristics of the product, on which performance indicators depend:

  • strength;
  • stiffness coefficient, which is directly proportional to the thickness of the tile;
  • thermal conductivity, a high rate allows you to arrange a warm floor under the base;
  • high fire resistance, due to which the tile can be used as a facing of stoves and fireplaces;
  • electrical insulation;
  • the tile is resistant to chemicals, with the exception of hydrogen fluoride;
  • fully complies with the requirements and standards of sanitary control, is not exposed to harmful microorganisms;
  • due to its high wear resistance, the tile is popular for laying in areas of high traffic.

Wear resistance marking is indicated by the manufacturer on the packaging.

In addition, according to state standards, it is important to comply with the following data:

  • Wear resistance – up to 0.18 g / sq. cm;
  • tensile strength – 28 MPa;
  • the number of cycles for determining frost resistance is not less than 25.

Pros and cons of using floor tiles for the kitchen and hallway

Before choosing a floor covering for the kitchen and the corridor, it is important to familiarize yourself with its strengths and weaknesses. Perhaps this will affect the choice of material.

  • The tile is environmentally friendly, in its composition only clay, sand and hypoallergenic components;
  • due to firing under the influence of high temperatures, the tile has increased strength;
  • moisture resistant, can hold water on the surface for several days. This protects it from the appearance of fungus and harmful microorganisms;
  • longevity – it can serve with proper care for more than a dozen years;
  • a protective layer protects the tile from external damage and scratches.
  • practical, caring for it is not difficult;
  • fire resistant.

When choosing a tile, you need to be prepared for some material features.

  • The surface of the tile is cold. High thermal conductivity allows you to arrange a warm floor under it;
  • slippery surface, especially with water. Therefore, for the kitchen, hallway and bathroom, you should choose a material with a special coating;
  • low sound insulation, which will help to increase the laying of an additional soundproof layer under the base;
  • if transported or laid incorrectly, the tiles can be broken. In addition, during operation, chips may appear from falling metal or sharp objects.

The disadvantages are not so critical. Knowing about these features, you can make a competent choice of tiles, which will delight for many years.

Types of forms of floor tiles for the kitchen and corridor

Tiles of traditional shapes – square or rectangular with an aspect ratio of 1 to 2 or 1 to 3 – go on sale. They come in the form of stripes, they are often used as a decor.

Many collections include only rectangular products that effectively fit into any room interior. You can design the floor in the corridor in the form of parquet or brickwork. With the help of such forms, the accents of the arrangement of furniture or zoning of the room are interestingly highlighted. Visually, you can change the geometry: make the elongated area more proportional if the long side is laid in proportion to the large side of the room.

Tiles of an unusual format look original in the interior: in the form of a polyhedron, with rounded corners, with slices in the form of a wave.

The main sizes of floor tiles for the corridor and kitchen

Manufacturers produce collections of standard sizes. For small rooms it will be more practical to fit a tile of 20 × 20, 20 × 30, 20 × 25, 30 × 30 cm. It will not require large cuts, there will be much less waste during installation. A beautiful interspersed pattern will be a tile of a small size of 10 × 10 and 10 × 15 cm.

For large areas, you can choose larger sizes 33.3 × 33.3, 40 × 40, 60 × 100 or 70 × 120 cm. In the collections, designers choose a harmonious combination of different sizes of tiles in the hallway on the floor. Photos of excellent solutions are presented in our gallery below.

Especially for our readers, we suggest using a convenient online kitchen designer , which allows you to organize a kitchen space to your taste and quickly calculate the cost of a kitchen set.

Technical characteristics of floor tiles

In order to avoid unpleasant surprises during operation, it is important to choose the right cover taking into account the purpose of the room and the physical characteristics of the material. Only then can we proceed to select a specific collection. All parameters are indicated by manufacturers on the packaging with certain symbols and numerical values.

Material porosity

This is a key indicator. Water absorption for unglazed products should not exceed 3.5%, for tiles with a glazed surface – not more than 4.5%. As a rule, manufacturers produce products with an indicator significantly lower than permissible.

Frost resistance is directly related to the porosity index. Tiles with porosities below 3% withstand sub-zero temperatures. The low moisture content protects it from freezing. Such products are marked B I.

Hardness and wear resistance

According to the perception of external loads, tiles are classified into the following categories:

Category Characteristics
0 Recommended use only for wall decoration
1 Use for rooms with low passability
2 For household use only, with the exception of corridors, balconies and stairs
3 Recommended for use in premises for domestic and commercial use. Exception for lobby, stairs and corridors
4 Recommended for places with high traffic
5 The highest class of wear resistance, used for areas with heavy traffic
Mechanical (strength) characteristics

When choosing tiles on the floor for the hallway, it should be remembered that during the operation it will be constantly subjected to mechanical stress. The life of the material is determined by the value of surface strength according to the Mohs scale.

The tiled surface is exposed to various minerals. The surface hardness value is considered equal to the previous value of the formation of scratches.

Important! On a glossy surface, more scratches are visible, therefore, for floors with increased traffic it is more rational to choose matte surfaces.

In addition to the indicator of surface strength, manufacturers indicate a class of resistance to chemical compounds. The classification is divided into 5 classes. AA marking is designed for tiles that are resistant to external influences. For marking D in areas with severe wear, the coating will quickly lose its original appearance.

Security requirements

Any material used for repair work in the apartment must be safe for people. First of all, it is compliance with fire safety standards. The tile is resistant to fire, it does not deform and does not emit toxic substances.

Secondly, friction. Manufacturers classify 4 categories of degree of slip. Marking 0 is considered dangerous. For areas with high traffic it is necessary to choose the category 0.75. To increase the friction force, a special spraying is applied to the surface – corundum.

Floor tiles for the corridor and kitchen: photos of the main layout methods

Styling methods depend on personal preferences and on the selected collection. The design of some materials is luxurious in itself and does not require complicated styling methods. For a simple format, you can choose an unusual way, thanks to which the tile will sparkle in a completely new way.

There are 6 main designs for laying tiles on the floor in the hallway or kitchen.

It is interesting! Tiles of different colors and shades can be laid in a checkerboard pattern, in the form of ornaments or patterns. It will be a bright and attractive accent indoors.

Combining floor tiles with a different coating

Using a combination of coatings, you can solve several problems at once. Place the floor tiles in the corridor only in the area of ??the front door, for the kitchen it is more practical to distinguish the working area. This will visually divide the area into zones. A beautiful combination can be made with both laminate and linoleum. The result is a spectacular finish of the entrance area.

Typically, a different color is chosen from the second coating. The combination can be performed in a straight line, curved, in the form of an angle. In addition, the tile section can be located on a certain elevation in the form of a small podium.

It is important! For safety reasons, the elevation should not exceed 5 cm from the level of the main coating.

Curvilinear alignment must be in harmony with the details of the interior. For example, you can mirror a line on a suspended ceiling.

Choosing floor tiles for the corridor and kitchen

A huge range of products makes the choice very difficult. It is necessary to follow the advice of practicing designers who will help you choose the best option for flooring. A correctly selected collection will emphasize the merits and hide the small errors of space.

Color selection

When choosing a color, it is necessary to take into account the basic design of the room and the basic techniques of professionals:

  • For a small space, you should choose light shades that visually expand the boundaries;
  • light tile on the floor is recommended for dark rooms with windows to the north or without windows. In bright sunlight, a dark coating will look interesting;
  • the classic combination of white and black tiles is always true. For stacking, choose a checkerboard pattern in a diagonal layout or in the form of rhombs;
  • optimal for the hallway or kitchen are shades of gray, beige or brown;
  • a glossy surface is more difficult to care for than a matte one;
  • a tile made of stone or wood in the interior looks quite stylish and is suitable for any style direction of the room.
Billing Selection

The kitchen and hallway are areas of increased danger. Possible contact with water, drops of fat in the kitchen, dirt from the street in the hallway. The choice should be on the tile on the floor in the hallway or kitchen with a slight roughness. Remember that dirt can accumulate in large depressions. You can choose a glossy surface, which, thanks to the coating, is more durable and better retains moisture.

Seam color

The most vulnerable spot on the floor is the seams. It is not recommended to use grout of light shades for floor tiles in the corridor and in the kitchen. After a short time from the former beauty there will be no trace. The hue of the grout must be chosen in the same color as the tile. The contrast does not look very beautiful.

For light coverage, dark seams will not work. For such cases, you should focus on epoxy grouting. Its cost is slightly more expensive than usual, but its strength is much higher.

One of the practical and sustainable coatings is considered to be floor tiles for the kitchen . Photos and prices presented in our review will allow you to choose the right option.

Proper operation and maintenance of floor tiles

Tiles on the floor do not require special care. It is enough to wipe it daily with a damp sponge, having previously removed the sand with a broom or vacuum cleaner. To remove stubborn dirt, you can use a cleaner with a universal composition. After cleaning, wash the coating with clean water. Here are some more effective ways:

  • To remove more stubborn dirt, you can use a stiff brush with a plastic bristle. Metal scrapers can leave traces of rust on the surface;
  • soap compositions are also not recommended, since the surfaces soon become dull;
  • You can not use several products with different compositions at once.

It should be known! Tiles do not like compounds that contain acid or ammonia. They destroy the seams. In addition, such fumes can be harmful to health.

You can use an old toothbrush to clean the seams. To clean severe contaminants, special means for plumbing are used. Stains from hard water can be removed using vinegar or special anti-lime agents.

The main nuances of self-laying floor tiles

Before starting work, it is necessary to review all the material to determine factory color defects and the absence of chips. Then you should mark the area according to size. Professionals advise starting the installation from the middle of the square, so you can get a beautiful, symmetrical pattern. This applies to traditional styling.

Instead of mounting crosses, a special DLS system can be used, with which not only the seams are controlled, but also the uniformity of the solution, and the unevenness of the base. A detailed master class of the modern system is presented in the video:

Kitchen design photo catalog with floor tiles

So, armed with all the tips, you can start choosing tiles on the floor in the kitchen. As samples, we

Interesting tile layout designs in the corridor on the floor: photos of interesting solutions

The gallery presents stylish techniques for laying floor tiles for the hallway and photos of the techniques for combining different coatings.

Where can I buy floor tiles for the kitchen and the corridor: prices, catalogs

To purchase floor tiles for the floor in the corridor or the kitchen, you can visit the manufacturer’s branded stores, where all modern collections, supplemented by interesting patterns, are presented at the exhibition stands. The consultant will help to correctly perform the layout using a special program, as well as calculate the amount of material.

Tiles should be taken with a small margin immediately, about 10% of the total. In the case of a fight or marriage during installation, it will be difficult to choose a shade in the store. Parties may vary in color.

The choice can be made on the Internet. On sites, the layout and counting program is in the public domain. The prices in online stores differ from manufacturers’ price lists for the better.


When choosing flooring, priority is given to strength, durability and a variety of colors and patterns. Tiles have all these qualities. You can choose a budget option or an exclusive collection. Having spent a little time on laying, you can enjoy the result for many years. A stylish and harmonious look will delight both the beloved family and guests at home for a long time.

Tiles on the floor for the corridor and kitchen: photo examples, selection, laying

The corridor and the kitchen are such rooms in which the flooring must meet certain requirements. It should not be easily soiled and easy to clean. Many for such purposes use linoleum, which fully meets the requirements. However, it has a significant drawback – this material is quite soft and it is quite possible to tear it, hooking, for example, the angle of the washing machine during its transportation. So, the best way out is porcelain tiles on the floor for the corridor and kitchen. A photo of how it looks in the interior, we will present today, simultaneously having sorted out the styling and some of its characteristics.

Quality indicators of floor tiles for the kitchen and corridor

The main indicator of the quality of floor tiles is its wear resistance, indicated in the marking as PEI. It is measured on a scale from 1 to 5. But besides this, there are other characteristics that are worth paying attention to, namely:

  • The moisture resistance indicator of tiles on the floor for the corridor or kitchen as a percentage;
  • Its size and the difference of this parameter between the tiles in the package;
  • How resistant is the material to chemical influences. The marking indicates the parameter from D to AA, where D is the least stability;
  • Mode of production. B – pressing, A – through extrusion;
  • Hardness level on a ten-point scale;
  • Sort of product. It is marked with color, where red is 1 grade, blue is 2, and green is 3.

Advantages and disadvantages of floor tiles for the kitchen or hallway

The positive qualities of such a coating are known to almost everyone. In addition to the aesthetic appearance, the tile is durable, it does not scratch. The only thing she is afraid of is falling on her from a height of solid heavy objects. And then, under such conditions, it can crack only if it is laid incorrectly and there is a void under it. If the master did everything right when laying, she can withstand even a strong blow with a hammer.

If we are talking about the merits of floor tiles in the corridor, then the disadvantages can not be avoided. The first is of course the temperature of the coating. The floor tiles in the corridor, as in the kitchen, will be quite cold. But it is fixable. It is only necessary to install a warm floor system before laying it.

Another disadvantage is that when wet, such a coating becomes quite slippery. And if in the kitchen you can wait for the floors to dry after washing, then in the corridor everything is a bit more complicated. Snow falling on shoes from the street can cause falls and injuries. To prevent such situations, choose a relief tile on the floor in the hallway, which has not a smooth, but a rough surface.

What shape a floor tile can have?

The shape of such a floor covering can be completely diverse. However, the most common is a square and a rectangle. Figured tiles have a higher cost and are quite difficult to install. Many masters who do not have sufficient experience refuse such work, even though it is paid very high.

The sizes of floor tiles presented on the shelves of construction stores

The standard sizes of tiles are: 300×300, 200×300, 200×250, 200×200, 100×150, 100×100 mm. But now the manufacturer offers more overall products: 400×400, 500×500, 600×1000, 700×1200 mm. As you can see, the range of sizes is very large. This means choosing for yourself what is necessary in a particular case, it will not be difficult.

Helpful information! If there is not enough experience in laying floor tiles, do not buy too large or too small products. The optimal in this case will be the size of 300×300 mm.

And here is another curly one. Such laying can be entrusted only to a professional

Main technical characteristics of flooring

When choosing the material for the floor in the hallway or kitchen, you should not be too demanding about the technical characteristics – you won’t be able to notice much difference anyway, but still you shouldn’t completely discount them. Now we will consider the main ones that can affect the decision of the home master when buying.

The porosity of the flooring material

This parameter determines the strength and frost resistance of the tile. Usually it is from 3 to 10%. The lower the percentage, the higher the quality of the material, and hence its cost. But for the flooring of the kitchen and the corridor, he does not play a special role. Of course, if you do not plan to roll heavy carts on metal wheels on it and freeze the hallway in winter. In normal use, you can close your eyes to this indicator.

Hardness and durability of floor tiles

This parameter is measured by classes, in the PEI category and can be anything, for the apartment it also does not matter. But it is worthwhile to understand that the higher the wear resistance, the more expensive the material will cost. Then the question arises, but what’s the point of paying extra money for something that is completely unnecessary? Conclusions do the master himself.

Strength characteristics of flooring

On the Mohs scale, an indicator of 5 or 6 is required. It turns out that these are just average values. Nothing terrible will happen if you take a more durable flooring, but given the area of ??the hallway and kitchen, this can “make” a hole in the budget.

Safety requirements

Here it is worth focusing. On a thirteen point scale, the coefficient of friction coefficient should not be lower than 0.75, and the anti-skid indicator should not be lower than 10 out of 13. Otherwise, there is a great risk of injury from falling on a slippery floor.

Resistance to chemicals

This indicator is also quite important. After all, the apartment often has to be cleaned with the addition of various chemical-based detergents. After all, it will not be very pleasant if the floor covering becomes unusable quite quickly due to their use. The indicator for this criterion for floor tiles should be A or AA.

Good to know! Light tile on the floor will be appropriate only for the kitchen. The flooring for the hallway should have darker tones. In this case, ceramic tile for the corridor, stylized as a natural dark wood, will look good.

When washing the floor, such edging saves the walls

Floor tiles for the corridor and kitchen: examples of layout options

There are only three options for laying flooring. It:

  • Normal – the tile is laid in even rows, all the seams vertically and horizontally coincide;
  • Normal styling is the easiest for the wizard.
  • Diagonal – a more complex option. If there is no experience in such work, it is better not to choose it. And there is a lot of waste left;
  • The diagonal, more difficult to execute, but looks decent
  • With offset. The tile is laid in a checkerboard pattern. Despite the fact that this option seems simple, there are many nuances when choosing it.

For home masters who do not have much experience in laying, and even more so for those who are going to do this work for the first time, it will be most logical to choose the first of the options. It is the most simple to perform, and such a flooring looks good.

Helpful information! If the home master has doubts that he will be able to do all the finishing work with his own hands, then there’s no risk. In this case, it would be better to turn to professionals for help.

How to combine tile with a different coating

It often happens that it is necessary to finish part of the floor of the room with tiles, and to lay linoleum on the other. This is quite doable, but some difficulties may arise, such as a drop in floor level. In this case, tile is first laid where necessary. Further, the remaining part is poured with a solution (the most convenient is the “liquid floor” composition). Pouring is done so that its level is lower than the top edge of the tile by the thickness of the linoleum to be laid. After drying, linoleum is laid in place with its mandatory fixation on the adhesive solution. Seams are closed with decorative strips, which can always be found in any hardware store. The main task – the color of the tile should match the shade of linoleum so that the distinction is not so noticeable.

How to choose the floor tiles in the hallway and kitchen

Of course, the choice of tiles on the floor in the hallway or kitchen is a purely individual matter, but there are still some rules that will prevent the home master from acquiring something that is completely out of harmony with one or another room. Sometimes it happens that a person in a store really likes the shade, but after they start laying the tiles, it turns out that he does not fit the walls at all or his size is too large for a narrow corridor. To avoid this, we will analyze the basic rules by which you should choose a floor covering.

How to choose the right shade

It is clear that it is impossible to give advice on shade without seeing the interior of the room itself. However, there are colors that will suit any of them. If we consider the tiles on the floor for the hallway, then regardless of the interior, mahogany shades, dark oak or beech will look great. Of course, someone likes darker tones, such as anthracite, but they are not suitable for everyone. But what really should be avoided is light tones. Firstly, they get dirty too quickly, and secondly, such shades will not look in the corridor – it is better to leave them for the kitchen, where the dark ones just do not fit. The rest is all at the discretion of the master.

Which flooring texture is better

The tile on the floor in the corridor should be exactly textured – this will protect against falling in the event of the formation of puddles on it from snow that is carried on boots. As for the kitchen floor, it is better to choose a smooth coating, which is easier to wash from grease. After all, he often ends up on the kitchen floor.

Important! When deciding what texture the flooring will have, you need to understand how much the floor will become dirty. After all, the more roughness on the tile, the more difficult it will be to wash it.

What color should be grout for joints

The grout is selected based on the color of the coating itself – they must be combined. The exception is when the kitchen is decorated in black and white. In this case, a dark grout is selected for the light tile, which will contrast well. However, it is not worth experimenting, it is better to go according to the classical scheme and choose a grout to match the flooring.

How to care for tiles on the floor

No special care and maintenance rules exist. Of course, avoid dropping heavy hard objects on it. And the rest, like regular linoleum, such floors require periodic wet cleaning. The only difference is that the tile tolerates cleaning with aggressive chemicals (excluding abrasive products). Nevertheless, it is worth noting that there are some nuances.

If coffee or tea is spilled on the floor, wipe it off immediately. No matter how dense the surface of the tile may seem, it nevertheless absorbs liquids, which exert their effect. And the seams from this can darken. Also, do not leave damp. Soaking into the grout at the seams, it will create excellent conditions for the development of fungus and mold.

The nuances of laying floor tiles with your own hands

For those home craftsmen who have never encountered tile laying in their lives, we will definitely prepare a detailed article with step-by-step instructions. And today we will consider it in general terms.

Of course, there are a lot of nuances in such work as laying tiles, both on the floor and on the walls. We will try to arrange an article on this subject in the near future. That is why, for those readers who need detailed information, we advise you – follow our publications.

What could be the design of a kitchen with floor tiles

Some specially hire a designer to make their kitchen look perfect, while others themselves try to come up with something original. Of course, everyone solves this issue as far as possible, but it’s much more interesting to think through all the details yourself. Indeed, only in this case it is possible to take into account all the nuances and create a unique interior, which certainly no one has. Now we will consider several photos of examples of similar works that were not done by professionals, but by ordinary home craftsmen:

You must admit that at times such decisions look even better than if they were dealt with by professionals.

Photo examples of tiles on the floor in the hallway

Choosing the design of the floor in the corridor and the location of the tiles is not easier than for the kitchen. And that means there is something to think about. The difficulties here lie not only in coloring or texture. We need to think about how to arrange it so that the narrow room visually expands. Let’s look at a few photos of the tiles in the hallway on the floor to have a general idea of ??how this can be done:

Where to buy tiles on the floor for the kitchen and hallway, and what is its cost

Previously, such products could only be purchased at hardware stores and markets. It was not very convenient. After all, I had to go to the point of sale, choose a color, and then also take the material home on my own. Now everything has become much easier. It is enough to turn on the computer, go online and, without getting up from the chair, order a floor covering that will be delivered directly to your home. And the cost of such products in online stores is much lower than on the shelves of ordinary stores. Now we will consider the average cost of such products, comparing not only prices, but also some characteristics.

There are more expensive materials, if desired, you can always find them on the Internet and on store shelves.

To summarize

Tiled flooring is always very aesthetically pleasing and reliable. This finish is quite durable and will never go out of style. In addition, when installing a “warm floor” system under it, walking on it will be doubly pleasant. The main thing is the right choice of material and its shade. Well and, of course, ”the quality of styling, which can be entrusted to professionals, but it is better to do everything yourself. After all, it’s not in vain that old people said, “if you want to do well, do it yourself.” As a final touch, we offer you a small photo gallery of interesting “tiled” solutions:

We hope that our topic today was interesting, informative, and most importantly useful to our esteemed reader. If you have any questions, our team will be happy to answer them in the discussions below. Write, ask, share your experience, which is sure to be useful to someone.

The most stylish and practical solutions

If you decide to make repairs in the hallway, then the best way to completely transform the room is to involve specialists in the work. Professionals perform finishing work efficiently and quickly. The best option for flooring is tile in the hallway.

The floor is constantly exposed to mechanical stress. It is necessary that it withstand the pressure of high heels, and be as susceptible to dirt and dust as possible.

Homeowners need to choose materials that are highly operational. Then the flooring will be durable and beautiful.

All about the pros and cons

Modern tiles in the hallway have the following advantages:

  • practicality;
  • wear resistance;
  • rich colors;
  • easy care;
  • various finishing methods.

Floor coverings for halls, corridors, vestibules are presented with various options. You can make parquet, lay linoleum or laminate. However, it is strong tiles that are the most spectacular and durable option.

Ceramic products look great in various styles. However, here you need to take into account the features of each of the design areas. So, in the hallway, decorated in a rustic style, floor tiles imitating natural stone are appropriate.

The hygiene of porcelain is beyond doubt. It can be washed with harsh chemicals. After such wet cleaning, the initial attractive appearance does not change at all.

Consider the slip coefficient when choosing finishing materials, do not use glazed ceramics for the corridor. If the sole of the shoe is wet, then there is a big risk that you will slip. Prefer matte tiles to the floor.

How to make a spacious hallway?

A room of impressive size can be decorated with ceramics and other components. Porcelain stoneware should be placed at the threshold: this area is exposed to maximum impact. The tiled zone can successfully replace a threshold mat.

By combining the two types of flooring, you can clearly zoning the interior. To this end, designers often use wood-like ceramics.

In the living room-kitchen, linoleum and laminate look great, and floor tiles in the corridor. In order for the zoning border to be clear, the tiled zone must be in contrasting shades.

The tile looks great in combination with a floorboard. Both materials do not require perfect seamless styling, which gives the floor surface a special charm.

Today, technology makes it possible to lay tiles in the corridor using a variety of methods. It is not necessary to adhere to strict geometry. You can stack the plates in waves, zigzags and in the form of irregular polygons. When there is a multi-level ceiling in the corridor, you can repeat its drawing on the floor.

We choose color resolutions, shapes and patterns

In a long and narrow room you should not use dark tiles, the corridor will become cold, and it will be completely uncomfortable in it. Here, any light colors that are combined with the color of the walls are appropriate. Designers do not recommend using white. If you want to visually expand the boundaries of the room, then horizontally stack through one contrasting narrow tile.

In the big hall you can show your creativity. In this case, it is easy to answer the question: “Which tile to choose in the corridor?” The models can be completely different in texture, color resolution and shapes.

In the interior, additional accents are appropriate. In the room, pay special attention to the decorative design of its central part. Create a beautiful tiled panel, and let the strip of small mosaics become the edging for a modern masterpiece.

The choice of drawings on the ceramic surface is great, it depends on the overall style of the interior. Take a closer look at the patterns on your wallpaper, furniture, or ceiling. Tile in the interior of the hallway with imitation marble – a suitable solution for the classics.

For fans of oriental style, the metlakh tile, on the surface of which freakish patterns are applied, is better suited. For modern hi-tech with minimalism, contrasting combination of colors and styling in a checkerboard pattern are suitable.

Professional or self-laying ceramic?

Ceramic products can become a real highlight of the room, if you attract a virtuoso professional to work. He will be able to complete any complex drawing that will please you for many years. Take a look at the photo of the tile for the corridor, it reminds after laying a multi-colored carpet, which does not have to be hidden.

If the tile is not laid correctly, then soon cracks will appear on its surface. Masters know that before starting the finishing work it will be necessary to prepare the foundation. It should be even and dry.

Those who want to save money on the family budget can try to lay the tiles yourself. You will need to perform the following types of work:

If the floor is concrete, then its surface is leveled using a special composition. Use the building level to make sure the surface is flat.

Allow the solution to dry and apply a primer.

Mark up according to the dimensions of the ceramic products.

It is better to start laying the tiles from the corner. Dilute the adhesive solution, following the recommendations from the manufacturer. Ready-to-use glue is applied to the surface with a smooth trowel and evened with a notched trowel.

To prepare the adhesive composition with your own hands, use electrical appliances: a construction mixer or a drill with a special nozzle. The dry composition is diluted in water, the mixture is mixed well and left for 15 minutes to settle. After that, it is mixed again.

Do not immediately pour the entire packaging of the adhesive into the container. It dries quickly, and you may not have time to use it. Experienced craftsmen advise to breed glue in parts.

The finished adhesive solution is applied to a floor area of ??1 m2 and to the surface of each ceramic product. To glue adhesion as strong as possible, the direction of the grooves on the tile and on the floor should not match.

If you use distance crosses, the seams will be neat and even. To level the tile, tap it with a rubber mallet.

Once the mortar has dried, use a rubber spatula to grind the seams.

In order for the joints to dry evenly and not to deform, the next two or three days they are specially moistened with water.

It’s time to take stock

Create a stylish floor covering that is not inferior in beauty and performance to other finishing materials. Tiled area retains the attractiveness of appearance throughout the entire service life.

Ceramics allow you to create durable flooring that requires minimal maintenance. You can choose finishing materials in online catalogs. Look at the photos of the interiors, for the design of which the tile you liked was used. This will help to present the final result.

Floor tiles in the hallway: ideas and solutions

Among all the rooms in the entrance hall house, it is the heaviest of all: due to street dirt, which inevitably settles on the surfaces, frosty air that bursts into a warm environment, or shoes with heels, which creates an additional load. Under the influence of such factors, the flooring quickly erases, becomes dirty, sometimes even cracks, in other words, loses its visual and practical properties. This can be avoided by selecting high-quality tiles on the floor in the hallway, which is deservedly ranked as a list of optimal finishing solutions.

Features of choice

When choosing a material for cladding, it is necessary to focus on the requirements that this space makes. Firstly, it must have a high degree of resistance to various destructive substances: moisture, household chemicals, abrasive substances and so on. Some types of tiles are vulnerable to such effects, especially in the area of ??joints. Waterproof grout will help to solve this problem, as well as the use of large fragments, instead of, for example, mosaics.

Secondly, the products must be wear-resistant, not washable with constant interaction with shoes, friction, and also withstand heavy objects. According to this indicator, the tile is divided into classes, and the higher – the better for the hallway.

Thirdly, it is worth thinking about the risk of injury and comfort of movement. The surface should be flat, but with a low level of slip, which in glossy often increases when in contact with water.


Last, but not least, are the visual merits of the tile – does it match the design of the room, how does it fit with other compositional elements, does it highlight the disadvantages of geometry, and so on.

Types of floor tiles

Floor tiles are presented in several variations, which differ in composition, characteristics, design capabilities and, of course, price. Consider the main ones.

Ceramic tile

The traditional and most common form, while not only for the floor of the hallway. It is made of fired clay, which endows fragments with resistance to wear, and with it – durability. True, this does not apply to strong impacts, which can lead to the formation of cracks.

Temperature differences of ceramic tiles are not terrible either, since they usually maintain a stable cold state, which will bring inconvenience to lovers to walk barefoot on the floor.

With its help, you can realize almost any idea: whether it is colorful colors, unusual shapes, complex patterns, embossed texture or minimalistic even coverage.

Porcelain Tiles

It is referred to as extra-class products with increased strength. Ceramic granite is made from different mixtures of crushed rocks, high-quality clay, as well as natural dyes, which are presented in a wide palette of shades.

This is a low-porous material that does not absorb much moisture, unlike ceramic tiles, which are not so ideal in this parameter. In this case, the complexity of laying does not vary much. He also copes with the rest of the requirements. The main disadvantage is the high cost.

Quartz Vinyl Tile

The construction industry has introduced an improved version of the tile, which is not afraid of any temperature, load and detergent. In addition to quartz, this material includes stabilizers, plasticizing compounds, pigments and vinyl, which endows the product with strength, ductility, and a variety of shapes.

Despite the presence of components of artificial origin, quartzinyl is considered safe for human health, but in the hallway it does not play such an important role due to the occasional use of space. If necessary, you can easily replace several blocks without damaging the overall composition.

The disadvantages include the massiveness of the fragments, as well as the need for perfect alignment of the base – even minor irregularities will significantly affect the movement.

Choosing a tile design for the hallway

Technical characteristics are, of course, an important factor in the choice of flooring, but aesthetics and visual decoration of the interior are equal in position. After all, the entrance hall is the first place that visitors face at home, so every detail in it creates a certain impression.

Color variations

Any type of tile has a wide palette of colors, so here the author is limited only by style, taste preferences and the possibilities of the area.

Traditionally, light shades help to expand the room: these are white, beige, walnut, gray, as well as pastel varieties. But against such a background, any pollution that appears literally every day is faster.

Unfortunately, traces of dirt will also be visible on a dark smooth floor, like any scratches. Such a gamut noticeably outlines the space, especially if it is not so much.

It is best to use muted colors with a heterogeneous texture or patterns for decoration – they look advantageous in the interior and do not seem boring. Pay attention to the tone, since cold options tend to visually move objects away, while light ones, on the contrary, bring them closer.


It is not possible to put photorealistic paintings on a tile – and it’s not worth it, especially in such a secluded room. But to embody other techniques on the strength of any type of product.

It can be simple geometric shapes, ethnic ornament or floral patterns, which are made in different colors. In large hallways, you can allow to decorate the floor with a small pattern, which creates a kind of cozy atmosphere. But most often, the decor is combined with a plain base, thereby balancing the bright details.

Texture solutions

If desired, you can order a finish with embossed texture, but this option is usually neglected due to the inconvenience of moving around the floor. In general, there are several types of surfaces:

  • Reflects surrounding objects and is rarely used in small hallways, despite the effectiveness of mirror surfaces in such spaces. The appearance of any scratches is immediately evident.
  • Optimal non-slip solution, on which traces of dirt are not so noticeable. Due to its low reflectivity, it reproduces color better.
  • A floor with a micro-relief on which light shimmers gently, beautifully emphasizing the decor of the tile.
  • It is a more budgetary and durable imitation of natural materials – wood or stone.

The most optimal are matte and satin products, mainly due to their practical properties.

Tile size and shape

The possibilities of the tile are limited – for example, you can not “lay” the room with a continuous coating. But they still offer a certain variety.

So, in large hallways, you can trim the floor in large blocks that emphasize its scale. Medium details fit perfectly into a medium to small room. But mosaic fragments are more likely to be attributed to decorative techniques, therefore they are not used for finishing the floor.

Regarding the forms, we note that curly ones are rarely found in interiors. In addition to standard square and rectangular elements, diamond-shaped, round, trapezoidal or hexagonal ones can be fit – and this assortment is not limited to. For the visual effect, several species are often combined.

Laying Types

It is interesting to veneer the floor in the hallway will also help different ways of laying material. These include:


  • Traditional direct stacking in a row;
  • The diagonal option, which requires additional steps to form suitable products;
  • Bricklaying;
  • Parquet, which is used for tiles that simulate a wooden texture;
  • Modular – a combination of tiles of different sizes;
  • Carpet, involving the use of any decorative elements.

To properly arrange the floor, it is better to turn to the services of professionals.

Interior Styles

There are many design options, but when you have to deal with a particular style, they often come down to several profitable solutions.

Classic style entrance hallway tiles

Floor tiles will help to realize the classics in its most luxurious interpretation, especially if the housing area contributes to this. This is the case when the gloss will look appropriate, especially in combination with marbled porcelain stoneware or classic patterns.

In more modern interiors, you can confine yourself to a light natural finish with several decorative elements that are consonant with the color scheme.

Tile for a hall in a modern style

The visual component of the direction is on a par with the practical and often draws aesthetics from it. It is necessary to focus on the convenience of the material, as well as its compliance with the geometry of space.

Harmoniously matte floor tiles of a light gamut with a homogeneous or structural surface will fit into such a hallway. But the modern style is suitable for interesting experiments – for example, a glossy black floor surrounded by white walls.

Scandinavian style hallway tiles

The dominant place in the Nordic interior is white, so you can not think for a long time and continue it at the base of the room. In addition to standard square fragments, you can pay attention to tiles of various shapes with a geometric pattern, or lay it like brickwork. Natural texture coatings are also suitable for the entrance hall.

Loft entrance hallway tiles

Inspired by industrial aesthetics, the loft is the perfect “canvas” for a variety of combinations. You can buy floor tiles for wood, stone or even concrete. Against the background of brick walls, detailed fragments of different shapes look interesting, contrasting with other compositional elements.

High-tech hallway tiles

Despite its commitment to high technology, hi-tech does not shy away from traditional solutions. Here you can use large solid blocks with a deep texture, matte products or those that gently reflect lighting.

The colors are strict, natural, continuing the monochrome palette characteristic of the style.

Floor tiles in the hallway – photo

Just one type of finish offers such a wide variety of design solutions: from texture to styling. In our selection of photographs, we tried to demonstrate the advantages of floor tiles in the hallway, inspiring you to new ideas. Enjoy watching!

Hallway Floor Tile: Design Ideas

Tile in the hallway: the most practical choice

The floors in the hallway are constantly exposed to the aggressive influence of moisture, sand, salts. In addition, heels and the sole of the shoe regularly act on the floor covering. For a site subject to such loads, you should choose the most resistant floor covering.

For some reason, we do not lay parquet in the bathroom and toilet, and we try to prefer tiles for the kitchen. But when it comes to the floor in the hallway, many forget about forethought. In the old days, floor tiles had an unattractive appearance, so they tried to use it to a minimum.

For obvious reasons, it was not accepted to decorate hallways and even kitchens with it. But nowadays, when the choice of floor tiles is unusually diverse, it is hardly advisable to refuse it in favor of a board, parquet or laminate in “problem” rooms. Even the most high-class laminate does not compare with tiles in terms of resistance to the effects of so-called aggressive environments.

Tile in the hallway looks elegant and appropriate. Such flooring visually “raises” the price of the interior. At the same time, the tile does not lose its original aesthetics for a very long time and over the years looks like new.

However, tile, like other coatings, has its drawbacks. She is cold and tough. Walking on it is not as pleasant as, for example, on a wooden board or carpet. With tiled floors, the interior of the hallway, lobby and corridor can turn out to be cold, gloomy, “breech”.

In this regard, tiling with a large area, of which the hallway is a part, seems to be an unattractive solution. However, this is not necessary, because the tile can be used to clad a small fragment. The combination of flooring in the hallway area helps in solving several problems.

Tiles laid out in a small area in the hallway area protect the floors from negative impact.

The combination of floors works on zoning: the hall area is effectively distinguished from the common space of the hall, corridor, lobby or studio. The border of the zones runs along the junction of the flooring. For effective zoning, it is important that the tile is noticeably different in color and pattern from the second floor covering.

The combined floor deprives the interior of a long corridor or entrance hall of monotony. The combination of the two coatings allows you to add extra curves or straight lines to the space.

If you prefer not to divide the space into zones through a combination of coatings, you can tile the entire area of the hall, corridor, or lobby. This area will look more comfortable if you select a tile under the tree. For effect, you can prefer a black and white solution.

Hallway tiles: which one to choose?

It is desirable that the tile is as resistant as possible to moisture and abrasion. Porcelain tile possesses such qualities. He never loses his color, because he is painted over to the full depth. Water absorption of porcelain stoneware is close to zero, which means that the tile is absolutely indifferent to moisture.

The tiles in the hallway should not be slippery. When purchasing material, you should pay attention to the anti-slip index. For the hallway, tiles with an anti-slip level of R10 or R11 are suitable.

The color of a tile matters not only from a decorative point of view. If the surface of the granite is textured, the light coating may become dirty over time. The fact is that in the bumps that make up the relief of the tile, the dirt will clog. Anti-slip material has a rough surface, which makes washing difficult.

Of course, such tiles can be cleaned using effective detergents, abrasives, brushes. However, not always and not everyone has the time and opportunity for this. If practicality of a floor is important for you, select textured porcelain tile darker.

Light “seams” also get dirty with time. For the hallway zone, it is worth choosing the least easily soiled grout. Polished and glazed porcelain tiles look luxurious. However, it is often too slippery, which means it is not suitable for the hallway.

Tile in the hallway: methods of combining with another coating

The tiled area may be on the same level with another floor covering, or may rise above it. The tile podium should not be high – in the hallway it is inconvenient and even unsafe. It is enough to raise the tiled level by 3-5 cm

Tiles in the hallway – 73 photos of the best design novelties

Typically, the flooring in a hallway can be influenced by a variety of factors, such as moisture, sand or salt.

This factor should also include the impact of the sole of the shoe. For this reason, it is worth choosing the most durable and resistant to external influences as materials.

In this case, particular preference is given to the tiles in the hallway, which, in addition to strength, is also elegant.

In addition to the many positive qualities of ceramic tiles in the hallway, special attention should be paid to some significant disadvantages. The main ones include:

  • stiffness and coldness;
  • discomfort while walking;
  • general atmosphere of gloom in terms of interior.

Many resort to the use of the combined method presented in the photo of the tile in the hallway, which makes it possible to use it in separate areas, thereby protecting the floor from negative external influences.

This technique is perfectly used as a division into zones.

The choice of tiles for the hallway

In any case, before buying tiles in the hallway to the floor, it is recommended to carefully study how resistant the material is to external influences, such as moisture or damage.

Porcelain is endowed with such qualities. Its color is preserved for a long time and this is due to the fact that the tiles are painted over the entire depth, and the attitude to humidity is extremely indifferent.

Let’s note a few important qualities regarding the design of tiles in the hallway:

  • lack of sliding on the surface;
  • color – a textured surface with a light coating tends to clog up with dirt in places where there are bumps.

As for the seams of the floor tiles in the hallway, experts recommend using a darker grout, since this option is less easily soiled.

Recently, the so-called polished and glazed porcelain has been especially popular, however, despite its impeccable appearance, it is endowed with a slippery surface, and, therefore, this option will not be the best for such a room.

Combining tiles with other coatings

Many resort to such a method as combining tiles in the hallway, and outwardly this method looks quite good.

So, for example, different coatings can be located not only at the same level, but also at different, thereby representing a kind of podium.

In this case, it is better to make it from tiles, while not raising it too much, otherwise it will be not only inconvenient, but also unsafe.

This technique can also be used as a method of zoning space.

There are several varieties of laying tiles in the hallway by connecting two floor coverings:

  • direct – the most popular option, characterized by simplicity and straightforwardness;
  • curly is a more complex variety. Requiring careful calculations.

As for color solutions, it all depends on the overall interior, style ideas and individual needs of the owners themselves.

Key Ideas for Using Floor Tiles

First of all, you should decide on the site, or rather, its size, which is planned to be covered with tiles.

In case it has rather impressive dimensions, you should think about the additional use of the game of color and shape, for example, a tile panel can be placed in the central part, and a mosaic version should be chosen as a cladding or edging.

Why is this combination of tiles in the hallway necessary? First of all, it will help to get rid of the monotony, well, plus to everything will give the room a certain originality and sophistication.

There is a little secret that helps to change the strict framework of the available space. To do this, just draw the combination obliquely. This method is especially in demand when you want to add something unusual and extraordinary to the style.

To visually increase the room, you can use the method of alternating light and dark stripes, this is especially true for decorative tiles in the hallway.

In general, color schemes can be very diverse: from calm to the most contrasting shades.

Modern styles increasingly involve the use of brighter shades of tiles in the interior of the hallway, capable of giving the hallway a certain personality.

Tile On The Floor In The Corridor: 245+ (Photo) What To Choose / How To Lay?

In the corridors and hallways the floors are subjected to the most massive loads, in comparison with other rooms. Therefore, wear-resistant coatings should be used in their decoration. Tile to the floor in the corridor – a reliable and incredibly durable coating.

What are the requirements for corridor flooring?

Corridor floor tiles should not only complement the overall look of the room, but also meet a number of requirements :

  • Wear resistance. An important criterion for any flooring, not just tile. The floor in the corridor is often subjected to movements in heels, dragging objects, including heavy ones. Of the 5 strength categories in the corridor, at least 3 classes should be selected.
  • Mechanical damage. The floors in the corridors are more often than others exposed to street dirt, aggressive substances and cleaning agents.
  • Water resistance. Ceramic for the floor in the corridor, having a low degree of porosity and high density, practically does not absorb and does not pass water. For halls, this figure should be no more than 3% in high-rise apartments and no more than 6% in private households. Otherwise, the material will very soon lose its presentation.
  • Coefficient of friction. For floor tiles in the corridor, it should be at least 0.75 and no less. Only with such indicators, the tile will not be sliding. Gloss for the corridor and hallway is not suitable.
  • Assessing this indicator according to the Mohs scale, 6 or 7 points will be considered optimal.
  • Hue and color are also important selection criteria. For example, a light floor in the corridor will show signs of contamination immediately after application. On too dark, dust and scratches, even the smallest ones, will be clearly visible.

Floors are subjected to the most massive loads.

It is best to buy a cold palette tile for the corridor, especially if it is still small and in addition.

Advantages and disadvantages – what more?

Operational characteristics make the tile an undoubted leader in terms of:

  • Tiles designed for floors withstand heavy loads and mechanical stress.
  • The material is resistant to detergents and other aggressive materials.
  • It does not form mold or fungus.
  • Moisture resistance. This indicator is very high. Floor tiles are not afraid of moisture, water, even in moments of flooding.
  • Quality material, properly laid, will last an average of 50 years without losing its presentation.
  • The world of floor tiles is wide. This means that the choice of color and texture is very large, which allows you to create different design floors in the hallways.
  • Materials are made from natural components, which means that they do not pose a risk to human health.
  • Fire resistance. The tile does not burn, does not melt, does not spread fire.
  • The tiled floors will always look beautiful, and the interior of the corridor will be completed.
  • Simplicity in repair. If one of the plates is damaged, it can be simply, quickly and easily replaced with a whole one.


  • Tile – the material is cold and hard enough. Barefoot walking on it is uncomfortable. Correct the situation can be a device of underfloor heating. If the area allows, one part of the room can be tiled, the second with some other coating.
  • High slip coefficient has glossy tiles. Therefore, it is better to buy a matte for the corridor. It is a little rough on the front side, therefore, the slip coefficient is smaller.
  • Tiles with grooves and bulges quickly get dirty and collect dust, especially at the front door. Therefore, it is better to put a dark, main area can be made light.

Varieties of floor tiles in the hallways

The range of floor tiles is presented in several versions. Each position is endowed with its operational characteristics, advantages and disadvantages. As well as design opportunities.


The most common, and not only for corridors. It can be found in the kitchen, bathrooms, halls and so on. It is made from clay by roasting. This gives it strength, reliability and durability. With very strong mechanical stresses it can still be broken.

Ceramics are not afraid of temperature fluctuations. Ceramic floor tiles keep their usual (cold) condition almost always. Walking barefoot on it is uncomfortable. But thanks to the diversity of forms, colors, textures and patterns, with it you can embody any design ideas.

Porcelain Tiles

This type of flooring is classified as an extra class. The material has increased strength. It is made from special raw materials based on rocks, very high quality clay, and natural dyes.

Porcelain stoneware is a low porous material, so it practically does not absorb moisture. The complexity of installation, in comparison with ceramics, is not very different. The remaining requirements for flooring are fully met. True, his cost is much higher.


Quartz vinyl

Advanced tiles, which has a fairly high resistance to chemicals (detergents). Not afraid of temperature changes. Consists of:

  • quartz;
  • stabilizers;
  • vinyl;

Thanks to this composition, the material comes out durable and ductile. Refers to environmentally friendly materials. Among the disadvantages: massiveness, the need to level the surfaces on which it is planned to be laid.

Extra features

The hallway or corridor is the first room that not only the owners enter, but also outsiders. So every detail, every little thing initially creates an opinion about the tastes of the residents of an apartment or house.

Color scheme

Floor tiles have a wide range of colors. In this regard, the author is limited exclusively to personal taste and aesthetic indicators.

In order to visually increase the corridor, select light shades . Beige, walnut, pastel, gray – they all belong to neutral and warm colors, combined with other shades. True, contaminated sites are immediately visible on them, and they can appear daily and often.

Dirt and scratches will be visible on the black tiled floor. Dark colors will clearly emphasize the size of the room. If it is small, then choose a dark tile for the floor, not worth it.

Choose muted tones with patterns and a heterogeneous texture. This option fits into the interior, looks harmonious, does not seem boring.

But be careful when choosing a cold palette – it can visually distance objects and furniture. Light – on the contrary, is able to bring them closer.

Tiled and monotonous – which is better?

Photos, patterns or paintings on the floor tiles can not be applied, and they are inappropriate in such a secluded room. Ethnic or floral pattern, ornament, simple geometry, made in multi-colored colors, will look in the corridor with dignity and aesthetics. If the room is large, you can decorate it with a small pattern, it will add comfort to it. The decor of the floor tiles can balance the bright colors by combining it with a monophonic coating.

Texture variations

Fans of extraordinary solutions can order tile for the floor with a relief pattern. But it will be very uncomfortable to move around, especially barefoot. Therefore, people often neglect this opportunity. The assortment of floor tiles is so diverse that the need to order the relief disappears by itself:


  • It is rarely used in small rooms, despite the fact that it visually expands the space due to the mirror image of objects. On the gloss immediately visible scratches and chips.
  • Matt Non-slip, dirt and scratches are not so clearly visible on its surface. It transmits better light flux due to low reflectivity.
  • This is a cheaper alternative to natural textured tiles. Structural tiles on the floor imitate natural stone and wood.
  • Tile with micro-relief on the front side. On such a surface, light flows shimmer gently, emphasizing the decor.

The best choice is matte or satin floor tiles. It looks more advantageous against the background of other varieties.

Shape and size

Potential for floor tiles is potentially limited. For example, a seamless coating from it will not work. Nevertheless, it is possible to introduce variety into the interior, with its help.

For large corridors and hallways, buy large blocks – this will emphasize the scale of the room. Medium will look good in small and medium rooms. Mosaic blocks are considered a decorative technique and are used extremely rarely.

There are different shapes and sizes.

An alternative to the traditional square and rectangle may be:

  • rhomboid;
  • hexagonal;
  • round;
  • trapezoidal floor tiles.

To create visual effects in one room, several types are combined at once.

Laying or how to put floor tiles with your own hands?

An interesting cladding can also be arranged in the corridor, because there are several ways to do this:

The straight line is the simplest, where the blocks are arranged in rows.

Diagonally, it is complicated by the fact that it requires additional steps from the master in the formation of a suitable product.

Brick – resembles the laying of walls of brick blocks.

Parquet – is used when laying structural elements that imitate wood.

Modular – a combination of tiles of different sizes and shapes.

Carpet – a combination of tiles with different decorative patterns or patterns.

All types of styling, except straight, are not easy. They can be correctly performed provided that the mater has experience and knowledge of the rules for working with the material.

Style solutions for interiors

There are many design options for floor tiles. But, when it comes to a certain style – it comes down to a few, but quite profitable options.


With the help of floor tiles, the classic style can be realized in the most luxurious interpretation, especially if the area allows you to do it. In the classic style, gloss on the floor will be appropriate. A combination of gloss with porcelain stoneware with a classic pattern or surface resembling marble will look good. You can make the design more modern and fashionable with the help of several decorative elements against the background of light shades.

Modern corridor

The visual guide of this stylistic decision is on an equal footing with the practical one, drawing aesthetics from it. Here you should focus on the convenience and quality of the coating and its full compliance with the geometry of the corridor or hallway. Matte tiles in bright colors look advantageous. You can, as an option, experiment with a structured one.

Modern style, in this secluded room, is appropriate in creating extraordinary style options. For example, black gloss on a white facade is a very good idea in the design of the corridor.


White should dominate Nordic interior design. So, here you do not need to think and doubt for a long time, but boldly continue it, taking it as a basis. In addition to the traditional square / rectangular, you can experiment with blocks of different shapes. After choosing a texture with a pattern, lay it with brickwork. Tiles imitating natural textures are also appropriate in the Scandinavian style.


Inspired by industrial aesthetics, the Loft style is the perfect cover for the implementation of various combinations. Tiles resembling, in texture, natural stone, wood or the same concrete will be interesting to look against the background of a facade of brickwork. In this embodiment, fragments of various forms that clearly contrast with other compositional objects will be accented.

High tech

Despite the fact that the hi-tech style is committed to high technology, he does not avoid the presence of traditional design solutions. Large tiled blocks with a deep texture can be laid on the floor. Matte or those that softer reflect light fluxes.

Colors, for high-tech style, it is better to choose natural shades. They will continue the monochrome palette of the interior, making it interesting and complete. Moreover, this is very characteristic of high-tech style.

Combined floors – with what and how is floor tile combined?

If the floor of the corridor is finished only with tiles, then it will look a little boring, especially if it is large and the blocks are laid out in rows. You can diversify it by combining tiles with a different floor covering. This option has several advantages:

If the tiles are laid directly on the threshold, the floor will be protected from excess dirt. Zoning is considered a modern trend. The border of the hall or residential area can be distributed by the separation lines of different coatings.

The corridor can be eliminated from monotony by combining different coatings on the floor. It is easier to make straight-line transitions, although there should not be any special difficulties with curly ones. Zoning with a podium will look spectacular, where the tiled area will be slightly raised.

Black and white floors in hallways or corridors

The corridor floors, decorated in this version, make it clean and bright, but if it lacks functionality, it will look like a banal protest to the cliche that has long been established. White floors provide a unique opportunity for owners to demonstrate their commitment to cleanliness. This decision is very unusual – not everyone can take such a step.

The combination of black and white zones

The key point of this design is a successful combination if you need to narrow or expand the space of the room. Dark zones visually narrow and bring objects closer, light zones increase and extend. In small rooms there should be more light tones, in large ones – you can try experimenting by adding more black zones.

Play with light

So that the room is not annoying, it is recommended to make one of the tones the background (leading) second – complement.

In the black and white version of the design of the floors, you will have to try hard, with a lot of effort and patience. White areas must necessarily become dominant, lighting enhance.

It is necessary to keep in mind the fact that on black all sloppiness and dirt will be visible more than on white.

The furniture must be selected so that all items are closed. In open or with glass things and objects that are located in them I will prettily spoil the harmony. Best to buy:

This decision is very unusual.

The plots located near the entrance to the house are drawn in dark color. Strong and durable floor coverings are selected to combine with the tiles. The corridor is a room where cleaning is done much more often than in other rooms, so the floor should withstand the effects of cleaning products. The most suitable is a laminate, although too aggressive chemicals, it is afraid.

In rooms where cleaning will be carried out too often with the use of strong detergents, the floor should only be made of tiles. Just combine different textures and colors.

Mosaic tiles will also look interesting. You can add charm to the corridor if you use floor tiles resembling natural stone.

Dark color is used for the area near the door.

Each of the listed warrants is well served in black and white. Here you can use various decoration methods: a game with patterns, a pattern or a solid picture version.

The role of color and texture on the overall look of the interior

Tile is the material that is most often used for laying on the floor in the corridor, kitchen, bathroom and toilet. Tile manufacturers, trying every year, release new shapes, textures, combined options. The upper layer of blocks is embossed, smooth, and rough. All this makes it possible to create different design projects in apartments. Consider how the tiles of different textures will look on the floor in the corridor.

Under the stone

Here you can use blocks of different shapes and textures. This is a good choice when designing a room for a classic or country style. Tile under the stone can convey to the eye different types of textures, having a characteristic pattern:

  • basalt;
  • slate;
  • granite;

And the marble flooring will convey the shiny, attractive texture of onyx, marble and agate.

You can use blocks of different shapes and textures

This material goes on sale in different shades from monotonous to shades that include different inclusions. Some types of stone blocks are made of porcelain stoneware, which means they have a rough surface. For the floor in the corridor – this is a very good quality, so it will not be considered sliding.

In the entrance area to the apartment it looks natural. The rest of the floor area can be arranged as:

  • sockets;
  • whole ornaments;

Decorative borders with skirting boards will also look good.

Under the wood

Wood in any design, fills the house with naturalness, adds coziness and comfort. On sale there is a tile imitating a tree of different breeds:

  • oak;
  • Pine;
  • beech;

Each tree has its own unique picture. You can add elitism to the room with this particular tile, successfully choosing the texture and shades. The material is easy to maintain, when laying creates a seamless effect.

You can decorate the room with a decorative border, place the blocks in the form of a Christmas tree, wickerwork (like parquet) or in a run. In a word, there are no restrictions in the design of the floor with wood tiles. Here, the author himself has the right to choose the method of styling and decoration. As well as the appearance of the pattern on the tile and color.


Mirroring enlarges both space and objects. Using mirror tiles on the floor in the corridor, you can recreate the multifaceted effect. Sold with a matte edge reminiscent of precious metals or tinted. Stacked in a square or rhombus.

To create a decorative effect, craftsmen often trim several areas with tiles with specks in the drawing. Nice as a decoration, the built-in backlight will look.


Gray in the design of the floor will give the room coldness, simplicity, restraint.

A plain gray floor is recommended for those who appreciate conciseness in the interior and rigor. Often such a floor is diluted with some kind of ornament or pattern. It looks gray tiles on the floor of the corridors naturally.

A successful combination of gray with emerald, white, green, mirror inserts and textures under the tree. The gray scale has many shades, so tiles of this color can be used as a background . To create a classic style, gray should be combined with some kind of dark.


Natural color is always relevant in the creation of design projects. A beige floor in the hallway is a practical option. Looks great in a duet with wooden furniture made in a classic design or with walls finished in wood, natural stone, simple or textured plaster.

The shape of the tile in beige colors is made in the form of an elongated or equilateral rectangle. It can be monophonic, or it can imitate the structure of wood, the so-called parquet boards. Using brown, you can create decorative borders and patterns in the corridor. Laying methods use any:

  • in the form of squares;
  • in a run;
  • by type of parquet laying.

And also combine different shapes and sizes of tiles.


This color on the floor of the corridor booth looks neutral and expensive. In order to emphasize the nobility of the decoration on the walls or furniture made of natural wood, you can use brown floor tiles. Such an interior will look pretty respectable. It is made and goes on sale in three versions: under wood, under a stone or completely monophonic.

It is more expedient to combine monochrome with decorative details – accent insert, pattern or border.

Brown under the tree will complement the interior with warmth, coziness and comfort.

Stone will create the effect of massiveness, add freshness to the room.

Some practical advice

Choosing a tile you need not only in beauty or color, but also in quality. For each package, the manufacturer sticks an icon that indicates the technical and operational characteristics:

  • PEI – indicates the level of endurance, measured on a special scale, can have indicators of 1-5 units.
  • The icon resembling a laboratory flask indicates that the tile has good resistance to chemically active substances.
  • Snowflake – the material is frost-resistant.
  • Puka – tiles designed for wall cladding.
  • Footprint – floor tiles.
  • In – says that the tile was produced by pressing. And – by extrusion technology.

It also indicates:

  • grade of tile;
  • color, texture;
  • thickness, length and width;
  • box weight;
  • mass of one tile;
  • area in one package;
  • number of blocks per pack.

For the corridor and the kitchen, it is better to purchase a rough tile. This will reduce the level of slipping. But too deep recesses will collect dust and dirt. Glazed endowed with greater strength and water resistance.

When choosing color, consider the overall interior. Porcelain tiles and ceramics of light colors are equally suitable for the corridor.

Black and white tiles will quickly get dirty and this will be visible to a third person immediately.

Successfully combined with each other: beige, brown and gray color tiles.

Matte is more practical than glossy, scratches on it are almost invisible, which can not be said about gloss.

A medium-sized tile with a repeating texture or pattern visually reduces the room, but adds comfort to it.

We must not forget about fakes. Do not trust too low prices and dubious manufacturers. Purchase material where you can easily be provided with certificates, and in the event of a defect, replace the product or return the full cost.

Tile is a cold material. But for the corridor – a great option, which has many advantages. Which is better to choose and how to put? You will learn all the secrets of the right choice in this article. After reviewing the information, please leave your comments with arguments in the comments. They will be useful to other readers. Your opinion is very important to us. Thank you for your participation. We appreciate your every feedback and time spent.


  • Durable, reliable, abrasion resistant
  • It gives the opportunity to create various design projects
  • Can be combined with any other floor covering.


  • Requires knowledge and experience when laying
  • With the wrong choice or combination, it can visually reduce a small corridor
  • Requires special attention when choosing it.